Self Winding Ratchet Strap 0.60 T
Suitable for jobs up to 600 kg, with a length of 3.5 m
Article number: 06-05-0002-02
| Article number | 06-05-0002-02 |
|---|---|
| Application | Trucks |
| Colour | Blue |
| Industry | Transport & Logistics |
| Length | 4 m |
| Material | Polyester |
| Tensioning hardware | Self-retracting ratchet |
| Weight | 1.7 kg |
| Width | 35 mm |
The Self Winding Ratchet Strap 1 T has an LC of 500 daN in a straight line and 1,000 daN when looped. The strap is 35 mm wide and 4 metres long, with a pointed hook at each end. After tensioning, the loose strap winds back into the ratchet by itself.
The strap may take 500 daN in a straight line, roughly 500 kg. When looped, with the strap around the load, 1,000 daN applies. That is well over one and a half times the LC of the 0.60 T, with a strap that is 10 mm wider.
A pointed hook hooks behind an edge or into a lashing eye, such as the lashing points on a trailer or open load bed. This makes the 1 T a good fit for vehicles without rails or rings in the load space.
At 4 metres, the strap has enough length for a full load bed or a larger load. The ratchet tensions the strap and holds the tension. On release, the strap winds back into the housing. The strap is blue and made of polyester, to EN 12195-2.
A 1 tonne automatic ratchet strap, the Self Winding Ratchet Strap 1 T, has an LC of 500 daN in a straight line and 1,000 daN when looped. That is roughly 500 and 1,000 kg. Both values are on the label in line with EN 12195-2, so the correct load is easy to check.
A pointed hook on a ratchet strap hooks behind a raised edge or into a lashing eye. These anchor points are found on trailers and open load beds. The Self Winding Ratchet Strap 1 T has a pointed hook at each end. For rings and rails in a van, an S hook is the better fit.

Your cart is empty.