MK-2 Container Lifting Lugs (Set 4 pcs.)
- 4 pieces
Set of 4 container hooks with an eye diameter of 45 mm
Article number: 10-03-0008-00
| Article number | 10-03-0008-00 |
|---|---|
| Industry | Construction & Infra |
| Length | 10,4 cm |
| Steel grade | SCW480 |
| Weight | 2.82 kg |
| Width | 9,6 cm |
The Depot Stacker IF-91 holds stacked empty containers in place at a depot or terminal. The stacker goes into the corner castings by hand and does not need to be locked. This speeds up stacking and means no lever has to be operated at height. The stacker is made of galvanised SCW480 cast steel.
The IF-91 is intended for empty containers on land, for storage at depots and terminals. The stacker goes into the corner casting of the lower container before the next one is placed on top. Full containers and containers on board a ship need locking twistlocks, such as the IF-51 or IF-55.
Empty containers are light and can slide on open ground in strong gusts. The tip of the stacker drops into the corner casting of the upper container and holds it in place. This keeps the stacks straight.
The IF-91 has no lever and no rotating parts. The stacker is fitted from below with a turning movement, and the upper container can simply be lifted off afterwards. Little material and no mechanism make the stacker economical and suited to long, intensive use.
The stacker is made of SCW480 cast steel with a galvanised finish against weather and seawater. The IF-91 is comparable to the SI-5D from other manufacturers.
A depot stacker is a part that places empty sea containers stably on top of each other without locking them. It fits into the corner castings and is used at depots and terminals for temporary storage. Unlike a twistlock, a depot stacker positions containers rather than clamping them.
A depot stacker is used when stacking empty containers on land, where speed and simplicity count. Because nothing needs to be locked, the work goes faster. A twistlock clamps containers firmly and is intended for transport or for stacking full containers.
Stacking two containers takes four depot stackers, one in each corner. With fewer than four, the stack becomes unstable and containers can shift. Every extra tier of empty containers needs its own new set of four Depot Stackers IF-91.
Empty containers are relatively light and can shift in wind or vibration when stacked. A depot stacker prevents this by guiding the containers onto each other and keeping them in position.
You see this, for example, at container depots where large numbers of empty containers are temporarily stored. Without an aid, these containers can go out of alignment in strong wind.
With depot stackers, the containers stay directly above one another, keeping the stack tidy and stable.
Four depot stackers are needed to stack two containers. One stacker is placed on each corner of the container.
Each stacker ensures the top container stays neatly in the correct position. Using fewer than four means the container isn't stable and can shift.
In practice, this means:
4 stackers per additional container layer
one stacker per corner point
When stacking multiple layers, a new set of four depot stackers is used per layer.

Your cart is empty.