Retaining Strap 0.25 T 2,5 m
Retaining strap suitable for jobs up to 250 kg
Retaining strap suitable for jobs up to 250 kg
Retaining strap suitable for jobs up to 250 kg
Suitable for jobs up to 350 kg
Suitable for jobs up to 700 kg
A retaining strap works without a ratchet. The strap is pulled tight by hand and the cam buckle holds the tension. This makes a retaining strap quick to use for light loads in vans, on trailers and in warehouses. All retaining straps are made of polyester, comply with EN 12195-2 and are available in a custom colour and with print.
Besides the standard blue, any other colour is possible. A company name or logo goes on the strap and on the label, and a different length is also an option. There is no minimum order. Printed retaining straps are ready for dispatch within 2 weeks. For large quantities, customer service confirms the exact lead time.
There are three versions. The 0.25 T has an LC of 250 daN, is 25 mm wide and comes in 2.5 or 5 metres. The 0.35 T has an LC of 350 daN at the same width and a length of 5 metres. The 0.70 T has an LC of 700 daN, is 35 mm wide and 5 metres long.
With a buckle, the tension goes no further than hand force allows. This lowers the risk of fragile loads, such as cardboard boxes or plastic parts, being crushed. Loads that need to be held firmly call for the higher tension of a ratchet strap.
The choice of retaining strap depends on the LC required. The Retaining Strap 0.25 T holds 250 daN, the 0.35 T 350 daN and the 0.70 T 700 daN. For small packages and bundles, a narrow 25 mm strap is enough. At 35 mm, the 0.70 T is wider and suits heavier light loads.
Yes, a cam buckle strap from Navacqs can be printed with a company name or logo, on the strap and on the label. A colour other than blue and a different length are also possible, with no minimum order. Printed retaining straps are ready for dispatch within 2 weeks.
Your cart is empty.