Ratchet Strap 0.80 T
Suitable for jobs up to 800 kg
Suitable for jobs up to 800 kg
2-piece ratchet strap suitable for jobs up to 1.5 tons
2-piece lashing strap suitable for jobs up to 2 tons
2-piece ratchet strap with slot fitting, suitable for jobs up to 2 tons
Suitable for jobs up to 3 tons
Suitable for jobs up to 4 tons
2-piece ratchet strap suitable for jobs up to 5 tons
2-piece Ratchet Strap ERGO, suitable for jobs up to 5 tons
Suitable for jobs up to 10 tons
Suitable for jobs up to 10 tons
A two piece ratchet strap consists of a ratchet part and a loose part, each with a hook or fitting at the end. Both parts are attached to an anchor point, after which the ratchet tensions the strap. This secures the load to the floor of a trailer, lorry or container. All two piece ratchet straps are also available in a custom colour and with a company name or logo.
Hook type, the length of the ratchet part and loose part, strap colour, print and label can all be chosen. This way the strap matches the anchor points of the vehicle and carries the company name. A custom order is ready within 2 weeks. For large quantities, it is advisable to agree the exact lead time with customer service in advance.
The label of a two piece ratchet strap shows two LC values. The lower one applies to diagonal lashing, where the strap runs in a straight line from anchor point to load. The higher one, double the first, applies to loop lashing. The strap then goes around the load, and the force is spread over two legs.
The range consists of nine versions:
Ratchet Strap 0.80 T: LC 400/800 daN, 25 mm, 5 m
Ratchet Strap 1.50 T: LC 750/1,500 daN, 25 mm, 5 m
Ratchet Strap 2 T: LC 1,000/2,000 daN, 35 mm, 6 m
Ratchet Strap 2 T with Slot Fittings: LC 1,000/2,000 daN, 50 mm, 5 m
Ratchet Strap 3 T: LC 1,500/3,000 daN, 35 mm, 6 m
Ratchet Strap 4 T: LC 2,000/4,000 daN, 50 mm, 9 m
Ratchet Strap 5 T: LC 2,500/5,000 daN, 50 mm, 9 m
Ratchet Strap 5 T ERGO: LC 2,500/5,000 daN, 50 mm, 9 m
Ratchet Strap 10 T: LC 5,000/10,000 daN, 75 mm, 9 or 10 m
The lighter versions secure boxes, roll containers and small machines, the heavier ones pallets, building materials and large machinery. Width and LC do not always go hand in hand. The 2 T and the 3 T are both 35 mm wide, and the 2 T with Slot Fittings has the same LC as the 2 T at a width of 50 mm.
A claw hook grips behind the edge of a load floor or into a lashing eye. A slot fitting clicks into a lashing rail with a slotted profile, as found in many vans and trailers. All but one of the two piece ratchet straps have claw hooks. The 2 T with Slot Fittings is designed for rail systems.
The choice of ratchet strap depends on the LC required. The lightest, the 0.80 T, has an LC of 400/800 daN and is 25 mm wide. The heaviest, the 10 T, has 5,000/10,000 daN at 75 mm wide. In between are seven versions of 25, 35 and 50 mm.
A one piece ratchet strap is a single continuous strap without hooks that goes around the load. A two piece ratchet strap consists of a fixed end with the ratchet and a loose end, each with a hook or fitting. This secures the load to lashing points on the load floor, in a straight line or around the load.
Your cart is empty.